Konfigurasi Routing OSPF

Konfigurasi Routing OSPF

(Open Shortest Path First)

 

Perangkat yang digunakan :

1. 3 Router

2. 3 Switch

3. 6 PC Client

Konfigurasi :

A. Konfigurasi Router

1. Konfigurasi Router A :

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip address 192.168.4.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#ex

Router(config)#int fa1/0

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config-if)#ex

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config)#router ospf 1

Router(config-router)#router-id 1.1.1.1

Router(config-router)#net 192.168.4.0 0.0.0.255 area 1

Router(config-router)#net 192.168.1.0 0.0.0.255 area 1

Router(config-router)#log-adjacency

Router(config-router)#ex

Router(config)#ex

Router#

%SYS-5-CONFIG_I: Configured from console by console

00:29:11: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on FastEthernet0/0 from LOADING to FULL, Loading Done

2. Konfigurasi Router B :

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip address 192.168.4.2 255.255.255.0

Router(config-if)#n sh

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#ex

Router(config)#int fa1/0

Router(config-if)#ip address 192.168.5.1 255.255.255.0

Router(config-if)#n sh

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config-if)#ex

Router(config)#int fa2/0

Router(config-if)#ip address 192.168.2.1 255.255.255.0

Router(config-if)#n sh

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet2/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/0, changed state to up

Router(config-if)#ex

Router(config)#router ospf 1

Router(config-router)#router

Router(config-router)#router-id 2.2.2.2

Router(config-router)#net 192.168.4.0 0.0.0.255 area 1

Router(config-router)#net 192.168.2.0 0.0.0.255 area 2

Router(config-router)#

00:19:03: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done

Router(config-router)#net 192.168.5.0 0.0.0.255 area 3

Router(config-router)#log-adjacency

Router(config-router)#ex

Router(config)#ex

Router#

%SYS-5-CONFIG_I: Configured from console by console

00:25:28: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on FastEthernet1/0 from LOADING to FULL, Loading Done

3. Konfigurasi Router C :

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa1/0

Router(config-if)#ip address 192.168.5.2 255.255.255.0

Router(config-if)#n

Router(config-if)#no sh

Router(config-if)#no shutdown

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

Router(config-if)#ex

Router(config)#int fa0/1

%Invalid interface type and number

Router(config)#int fa0/0

Router(config-if)#ip address 192.168.3.1 255.255.255.0

Router(config-if)#n sh

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#ex

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config)#router ospf 1

Router(config-router)#router

Router(config-router)#router-id 3.3.3.3

Router(config-router)#net 192.168.5.0 0.0.0.255 area 3

Router(config-router)#

00:35:32: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on FastEthernet1/0 from LOADING to FULL, Loading Done

Router(config-router)#net 192.168.3.0 0.0.0.255 area 3

Router(config-router)#log-adjacency

Router(config-router)#ex

Router(config)#ex

Router#

%SYS-5-CONFIG_I: Configured from console by console

B. Konfigurasi PC Client

1. PC 0

2. PC 1

3. PC 2

4. PC 3

5. PC 4

6. PC 5

 

SELESAI